| "This weapon isn't functioning properly! Send it back to the armory and perform the necessary repairs to make it functional again."
This article needs to be cleaned up and brought up to Gun Wiki standards. |
The KAC PDW was a prototype PDW designed by KAC, that was first presented on the NDIA Small Arms Symposium in 2006.[1]
Design Details[]
The rifle used a dual-piston system with the recoil spring is between both of the pistons, which is really similar to the AK family rifles system.[1]
Till is based on the M4 pattern, the system might be the same used by the SR47, however, there isn't an ejection port cover along with the upper receiver.[2]
The rifle has a custom flash suppressor based on the original Stoner 63.[2]
The gun has Picatinny rails and used the KAC flip-up sights.[2]
Cartridge details[]
One of the few examples of the 6x35mm
The rifle used the obscure 6x35mm that is based on the .243 Winchester, the cartridge has 50% less recoil compared to the 5.56 mm NATO.[1]
The version shown was of a 65-grain bullet and had a muzzle velocity of 739 m/s.[2]